Home > Invar 42 Sheet and Plate
Bilal Nickel Alloys, located in Safat, Kuwait, is a reliable manufacturer and supplier of Invar 42 Sheet and Plate. This nickel-iron alloy is famous for its incredibly low coefficient of thermal expansion. Thanks to its ability to maintain dimensional stability across a range of temperatures, it’s a must-have in precision engineering and critical industrial applications. Bilal Nickel Alloys produces Invar 42 Sheet and Plate to the highest standards, ensuring top-notch quality, durability, and reliability. With impressive mechanical properties and resistance to corrosion, Invar 42 is a go-to choice in aerospace, electronics, and scientific instruments, providing engineers with a trustworthy solution for projects that require thermal stability and structural integrity.
Invar 42 Sheet and Plate is primarily made up of 42% nickel and 58% iron, which gives it that distinctive low thermal expansion. This alloy boasts high dimensional stability, moderate tensile strength, and excellent fatigue resistance, allowing it to perform well even under repeated thermal cycling. It also resists corrosion and oxidation, boosting its durability in various environments. The unique blend of mechanical strength and thermal invariance makes Invar 42 Sheet and Plate perfect for precision applications where minimal expansion or contraction is crucial, ensuring long-lasting reliability and structural integrity.
| Standards : | Per Chem Mil-I-23011C CL 7, Boeing D-33028, ASTM B753, ASTM F1684, ASTM F30 |
| Dimensions : | ASTM, ASME, and API |
| Sheets Thickness : | Range from .008″ to .0125″ |
| Shims Thickness : | Range from .01″ to .0125″ |
| Plates Thickness : | Ranges from .0125″ to 5.00″ |
| Sheets/Plates Width : | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Sheets/Plates Length : | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Tempers : | Annealed, 1/4, 1/2 Hard, 3/4 Hard, Full Hard |
| Hardness : | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
| Value Added Service : | Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
| Element | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Invar 42 | KSI (MPa) 36 / (248) | KSI (MPa) 71 / (490) | 40 % |
| Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| 8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 35,000 , MPa – 240 | Psi – 80,000 , MPa – 550 | 40 % |
| Density | 0.293 lb/cu in |
| Specific Gravity | 8.12 |
| Curie Temp | 715 oF or 380oC |
| Melting Point | 2600 oF or 1427oC |
| Electrical Resistivity | 66 Micro-ohm-cm or 400 ohm-cir mil/ft |
| Thermal Conductivity | 10.7 W/cm oC or 74.7 BTU-in/sq. ft-hr |
| Specific Heat | 0.12 Cal/g- oC |
| Thermal Expansion | 5.0 ppm / oF (75oF to 842oF) or 9.0 ppm / oC (25oC to 450oC) |
At Bilal Nickel Alloys, we take pride in being the largest supplier, exporter, and manufacturer of Nimonic Sheet and Plates in Safat, Kuwait, providing cutting-edge solutions for all your piping needs. Our state-of-the-art production plants are strategically located in the Kuwait, allowing us to maintain a vast inventory of over 16,000 tons of premium-quality materials readily available in stock. We are dedicated to delivering superior products and services, ensuring reliability and excellence for our global clientele.
Contact us to get a quick quote for your requirement.
Invar 42 Sheet and Plate finds its place in industries that require outstanding dimensional stability. It’s perfect for aerospace components, precision instruments, scientific equipment, and optical devices where thermal expansion needs to be kept to a minimum. Other uses include mounting fixtures, measuring tools, and molds for plastics and composites. Its low expansion characteristics make it an excellent choice for electronic substrates, sensors, and telescope structures.
